Displaying 802.1x statistics – Brocade BigIron RX Series Configuration Guide User Manual
Page 1145
![background image](/manuals/361694/1145/background.png)
BigIron RX Series Configuration Guide
1067
53-1002484-04
Displaying 802.1x information
34
Displaying 802.1x statistics
To display 802.1x statistics for an individual port, enter a command such as the following.
Syntax: show dot1x statistics [all | ethernet <slot/port>]
The following table describes the information displayed by the show dot1x statistics command for
an interface.
TABLE 173
Output from the show dot1x config command for an interface
This field...
Displays...
AuthControlledPortControl
The port control type configured for the interface. If set to auto,
authentication is activated on the 802.1x-enabled interface.
multiple-hosts
Whether the port is configured to allow multiple Supplicants accessing
the interface on the BigIron RX through a hub.
Refer to
“Allowing multiple 802.1x clients to authenticate”
for information on how to change this setting.
max-clients
The maximum number of clients that can be authenticated on this
interface.
multiple-clients
Shows if the interface is enabled or disabled for multiple client
authentication.
filter-strict-security
Shows if the interface is enabled or disabled for strict security mode.
filter-strict-security:
Whether strict security mode is enabled or disabled for the interface.
See
“Disabling and enabling strict security mode for dynamic filter
TABLE 174
Output from the show dot1x statistics command
This field...
Displays...
RX EAPOL Start
The number of EAPOL-Start frames received on the port.
RX EAPOL Logoff
The number of EAPOL-Logoff frames received on the port.
RX EAPOL Invalid
The number of invalid EAPOL frames received on the port.
BigIron RX# show dot1x statistics e 3/3
Port 1/3 Statistics:
RX EAPOL Start: 0
RX EAPOL Logoff: 0
RX EAPOL Invalid: 0
RX EAPOL Total: 2
RX EAP Resp/Id: 1
RX EAP Resp other than Resp/Id: 1
RX EAP Length Error: 0
Last EAPOL Version: 1
Last EAPOL Source: 0050.da0b.8bef
TX EAPOL Total: 3
TX EAP Req/Id: 1
TX EAP Req other than Req/Id: 1
Num Sessions: 1
Num Restricted Sessions: 0
Num Authorized Sessions: 1