Brocade BigIron RX Series Configuration Guide - Manual (Page 1468)

1390 BigIron RX Series Configuration Guide
53-1002484-04
Syslog messages
A
Alert OSPF LSA Overflow, LSA Type =
< lsa-type>
Indicates an LSA database overflow.
The
< lsa-type> parameter indicates the type
of LSA that experienced the overflow
condition. The LSA type is one of the
following:
•
1 – Router
•
2 – Network
•
3 – Summary
•
4 – Summary
•
5 – External
Alert ISIS MEMORY USE EXCEEDED IS-IS is requesting more memory than is
available.
Alert MAC Authentication failed for < mac-address>
on < portnum> (Invalid User)
RADIUS authentication failed for the specified
< mac-address> on the specified < portnum>
because the MAC address sent to the RADIUS
server was not found in the RADIUS server’s
users database.
Alert MAC Authentication failed for < mac-address>
on < portnum>
RADIUS authentication was successful for the
specified
< mac-address> on the specified
< portnum>; however, the VLAN returned in
the RADIUS Access-Accept message did not
refer to a valid VLAN or VLAN ID on the device.
This is treated as an authentication failure.
Alert MAC Authentication failed for < mac-address>
on < portnum> (No VLAN Info received from
RADIUS server)
RADIUS authentication was successful for the
specified
< mac-address> on the specified
< portnum>; however, dynamic VLAN
assignment was enabled for the port, but the
RADIUS Access-Accept message did not
include VLAN information. This is treated as
an authentication failure.
Alert MAC Authentication failed for < mac-address>
on < portnum> (RADIUS given VLAN does not
match with TAGGED vlan)
Multi-device port authentication failed for the
< mac-address> on a tagged port because
the packet with this MAC address as the
source was tagged with a VLAN ID different
from the RADIUS-supplied VLAN ID.
Alert MAC Authentication failed for < mac-address>
on < portnum> (RADIUS given vlan does not
exist)
RADIUS authentication was successful for the
specified
< mac-address> on the specified
< portnum>; however, the RADIUS
Access-Accept message specified a VLAN
that does not exist in the device’s
configuration. This is treated as an
authentication failure.
Alert MAC Authentication failed for < mac-address>
on < portnum> (Port is already in another
radius given vlan)
RADIUS authentication was successful for the
specified
< mac-address> on the specified
< portnum>; however, the RADIUS
Access-Accept message specified a VLAN ID,
although the port had previously been moved
to a different RADIUS-assigned VLAN. This is
treated as an authentication failure.
TABLE 242 Brocade Syslog messages (Continued)
Message level Message Explanation