Brocade BigIron RX Series Configuration Guide User Manual
Page 326
248
BigIron RX Series Configuration Guide
53-1002484-04
Deploying a LAG
8
BigIron RX# show lag brief
Total number of LAGs: 4
Total number of deployed LAGs: 3
Total number of trunks created:3 (31 available)
LACP System Priority / ID: 0001 / 0004.80a0.4000
LACP Long timeout: 90, default: 90
LACP Short timeout: 3, default: 3
LAG Type Deploy Trunk Primary Port List
d1 dynamic Y 3 32/2 ethe 13/2 to 13/3 ethe 32/2
e dynamic Y 1 2/3 ethe 2/1 ethe 2/3 ethe 2/5
p static Y 2 3/1 ethe 4/1 ethe 4/3 ethe 4/5
s1 static N none 32/3 ethe 13/4 ethe 32/3 to 32/4
BigIron RX# show lag
Total number of LAGs: 4
Total number of deployed LAGs: 3
Total number of trunks created:3 (31 available)
LACP System Priority / ID: 0001 / 0004.80a0.4000
LACP Long timeout: 90, default: 90
LACP Short timeout: 3, default: 3
=== LAG "d1" (dynamic Deployed) ===
LAG Configuration:
Ports: ethe 13/2 to 13/3 ethe 32/2
Primary Port: 32/2
LACP Key: 104
Deployment: Trunk ID 3
Port Link L2 State Dupl Speed Trunk Tag Priori MAC Name
3/2 Up Forward Full 10G 3 Yes level0 0004.80a0.44d9
13/3 Up Forward Full 10G 3 Yes level0 0004.80a0.44d9
32/2 Up Forward Full 10G 3 Yes level0 0004.80a0.44d9
Port [Sys P] [Port P] [ Key ] [Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope]
13/2 1 1 104 Yes L Agg Syn Col Dis No No Ope
13/3 1 1 104 Yes L Agg Syn Col Dis No No Ope
32/2 1 1 104 Yes L Agg Syn Col Dis No No Ope
=== LAG "e" (dynamic Deployed) ===
LAG Configuration:
Ports: ethe 2/1 ethe 2/3 ethe 2/5
Primary Port: 2/3
LACP Key: 105
Deployment: Trunk ID 1
Port Link L2 State Dupl Speed Trunk Tag Priori MAC Name
2/1 Up Forward Full 1G 1 Yes level0 0004.80a0.402a
2/3 Up Forward Full 1G 1 Yes level0 0004.80a0.402a
2/5 Up Forward Full 1G 1 Yes level0 0004.80a0.402a
Port [Sys P] [Port P] [ Key ] [Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope]
2/1 1 1 105 Yes L Agg Syn Col Dis No No Ope
2/3 1 1 105 Yes L Agg Syn Col Dis No No Ope
2/5 1 1 105 Yes L Agg Syn Col Dis No No Ope
Syntax: show lag <lag-name> [brief] [deployed] [dynamic] [keep-alive] [static]
describes the information displayed by the show lag command.