Brocade BigIron RX Series Configuration Guide - Manual (Page 1539)

BigIron RX Series Configuration Guide 1461
53-1002484-04
Security/Management
E
MAC port security
show auth-mac-address detail “Displaying multi-device port authentication
configuration information”
on page 1017
show auth-mac-address “Displaying authenticated MAC address information”
on page 1017
show auth-mac-addresses authorized-mac “Displaying the authenticated MAC addresses” on
page 1021
show auth-mac-addresses unauthorized-mac “Displaying the non-authenticated MAC addresses”
on page 1021
Commands See ...
age < minutes> “Setting the MAC Port Security age timer” on
page 1033
autosave < minutes> “Autosaving secure MAC addresses to the
startup-config”
on page 1033
enable “Enabling the MAC Port Security feature” on
page 1030
“Manually re-enabling a interface” on page 1038
maximum < number-of-addresses> “Setting the maximum number of secure MAC
addresses for an interface”
on page 1031
port security “Enabling the MAC Port Security feature” on
page 1030
restrict-max-deny < number> “Restricting interface access” on page 1034
secure < mac-address> “Specifying static secure MAC addresses” on
page 1032
show mac [all] “Displaying a list of MAC addresses” on page 1041
show port security < module> | < portnum> “Displaying MAC Port Security settings” on
page 1039
show port security mac “Displaying the secure MAC addresses list on the
device”
on page 1040
show port security statistics < portnum> I < module> “Displaying MAC Port Security statistics” on
page 1040
shutdown-time < minutes> “Interface shutdown time” on page 1038
violation restrict “Restricting interface access” on page 1034
violation shutdown “Shutdown the interface” on page 1034
Commands See ...