Security enhancements – Brocade BigIron RX Series Configuration Guide User Manual
Page 74

lxxiv
BigIron RX Series Configuration Guide
53-1002484-04
Security enhancements
TABLE 26
Security enhancements
Enhancement
Description
See page
Multi-device Port 
Authentication 
Multi-device port authentication is now supported on 
the BigIron RX. 
Book: BigIron RX Series 
Configuration Guide
Chapter:
Port Security Feature 
and Transparent Port Floo
ding”
802.1x Port Security
This release allows you to enable 802.1X port 
security and multi-device port authentication on the 
same interface. 
Book: BigIron RX Series 
Configuration Guide
Chapter:
Port Security MAC Deny
With this release, you can configure deny mac 
addresses on a global level or on a per port level.
Book: BigIron RX Series 
Configuration Guide
Chapter:
Port Security Feature 
and Transparent Port Floo
ding”
IP Fragmentation Protection
Fragmented IP packets with undersized fragments 
and overlapping fragments are dropped. 
Book: BigIron RX Series 
Configuration Guide
Chapter:
Section:
IP Option Attack Prevention
Packets with IP options in their header are 
automatically dropped. Enabling the ip 
ip-option-process command allows the device to 
process packets that use IP options.
Book: BigIron RX Series 
Configuration Guide
Chapter:
Section:
IP Receive ACLs
You can use IPv4 ACLs to filter the packets intended 
for the management processor to protect the 
management module from being overloaded with 
heavy traffic that was sent to one of the Layer 3 
Switch IP interfaces. 
Book: BigIron RX Series 
Configuration Guide
Chapter:
Section:
destination mirror port for 
IP receive ACLs”
Static Route Tagging
Static routes can be configured with tag values.
Book: BigIron RX Series 
Configuration Guide
Chapter:
Section:
MTU enhancements for IPv4
In this release, you can configure IPv4 MTU to be 
greater than 1500 bytes. 
Book: BigIron RX Series 
Configuration Guide
Chapter:
Section:
