Displaying igmp traffic status – Brocade BigIron RX Series Configuration Guide User Manual
Page 745
![background image](/manuals/361694/745/background.png)
BigIron RX Series Configuration Guide
667
53-1002484-04
IGMP v3
24
Displaying IGMP traffic status
To display the traffic status on each virtual routing interface, enter the following command.
Syntax: show ip igmp traffic
The report shows the following information.
Group membership time
The number of seconds multicast groups can be members of this group
before aging out.
(details)
The following is displayed for each interface:
•
The ID of the interface
•
The IGMP version that it is running (default IGMP V2 or configured
IGMP V3)
•
The multicast protocol it is running: DVMRP, PIM-DM, PIM-SM
•
Address of the multicast group on the interface
•
If the interface is a virtual routing interface, the physical port to which
that interface belongs, the number of groups on that physical port,
whether or not the port is a querier or a non-querier port, the age of the
port, and other multicast information for the port are displayed.
This field
Displays
QryV2
Number of general IGMP V2 query received or sent by the virtual routing
interface.
QryV3
Number of general IGMP V3 query received or sent by the virtual routing
interface.
G-Qry
Number of group specific query received or sent by the virtual routing
interface.
GSQry
Number of source specific query received or sent by the virtual routing
interface.
MbrV2
The IGMP V2 membership report.
MbrV3
The IGMP V3 membership report.
Leave
Number of IGMP V2 “leave” messages on the interface. (See ToEx for IGMP
V3.)
IsIN
Number of source addresses that were included in the traffic.
IsEX
Number of source addresses that were excluded in the traffic.
ToIN
Number of times the interface mode changed from exclude to include.
ToEX
Number of times the interface mode changed from include to exclude.
This field
Displays
BigIron RX# show ip igmp traffic
Recv QryV2 QryV3 G-Qry GSQry MbrV2 MbrV3 Leave IsIN IsEX ToIN ToEX ALLOW BLK
v5 29 0 0 0 0 0 0 0 0 0 0 0 0
v18 15 0 0 0 0 30 0 60 0 0 0 0 0
v110 0 0 0 0 0 97 0 142 37 2 2 3 2
Send QryV1 QryV2 QryV3 G-Qry GSQry
v5 0 2 0 0 0
v18 0 0 30 30 0
v110 0 0 30 44 11