Brocade BigIron RX Series Configuration Guide - Manual (Page 1502)

1424 BigIron RX Series Configuration Guide
53-1002484-04
BGP4
E
maximum-paths < num> “Changing the maximum number of shared BGP4
paths”
on page 845
med-missing-as-worst “Treating missing MEDs as the worst MEDs” on
page 845
multipath ebgp | ibgp | multi-as “Customizing BGP4 load sharing” on page 846
neighbor < ip-addr> | < peer-group-name> password [0 |
1] < string>
“Encryption example” on page 852
neighbor < ip-addr> | < peer-group-name> capability orf
prefixlist [send | receive]
“Enabling cooperative filtering” on page 885
neighbor < ip-addr> | < peer-group-name>
soft-reconfiguration inbound
“Enabling soft reconfiguration” on page 893
neighbor < ip-addr> | < peer-group-name>
unsuppress-map < map-name>
“Removing route dampening from suppressed
neighbor routes”
on page 851
neighbor < ip-addr>| < peer-group-name>
[advertisement-interval < num>]
[capability orf prefixlist [send | receive]]
[default-originate [route-map
< map-name>]]
[description < string>]
[distribute-list in | out < num,num,...> | < acl-num> in |
out]
[ebgp-multihop [
< num>]]
[filter-list in | out < num,num,...> | < acl-num> in | out |
weight]
[maximum-prefix
< num> [ < threshold>] [teardown]]
[next-hop-self]
[nlri multicast | unicast | multicast unicast]
[password [0 | 1]
< string>]
[prefix-list < string> in | out]
[remote-as < as-number>]
[remove-private-as]
[route-map in | out
< map-name>]
[route-reflector-client]
[send-community]
[soft-reconfiguration inbound]
[shutdown]
[timers keep-alive
< num> hold-time < num>]
[unsuppress-map < map-name>]
[update-source < ip-addr> | ethernet < portnum> |
loopback < num> | ve < num>]
[weight < num>]
“Configuring BGP4 neighbors” on page 846
“Configuring a peer group” on page 855
neighbor < ip-addr> distribute-list < name-or-num> in | out “Defining neighbor distribute lists” on page 876
neighbor < ip-addr> peer-group < peer-group-name> “Applying a peer group to a neighbor” on page 856
neighbor < ip-addr> route-reflector-client “Configuration procedures” on page 869
neighbor < ip-addr> shutdown “Administratively shutting down a session with a
BGP4 neighbor”
on page 856
neighbor < peer-group-name> peer-group “Configuring a peer group” on page 855
network < ip-addr> < ip-mask> [route-map < map-name>]
| [weight < num>] | [backdoor]
“Specifying a list of networks to advertise” on
page 857
“Specifying a route map name when configuring
BGP4 network information”
on page 857
Commands See ...