Brocade BigIron RX Series Configuration Guide - Manual (Page 1542)

1464 BigIron RX Series Configuration Guide
53-1002484-04
SNMP
E
SNMP
SSH
locate startup-config “Displaying the current location for saving
configuration changes”
on page 50
locate startup-config [slot1 | slot2 | flash-memory]
[/
< dir-path-name>/] < file-name>
“Specifying the location for saving configuration
changes”
on page 50
Commands See ...
Commands See ...
show snmp engineid “Displaying the engine ID” on page 1101
show snmp group “Defining an SNMP group” on page 1099
show snmp server “Displaying the SNMP community strings” on
page 1097
show snmp user “Displaying user information” on page 1102
snmp-server community [0] < string>
ro | rw [view < viewname>] [ < standard-acl-name> |
< standard-acl-id> | ipv6 < ipv6-access-list-name>]
“Adding an SNMP community string” on page 1096
snmp-server engineid local < hex-string> “Defining the engine ID” on page 1098
snmp-server group < groupname>
v1 | v2c | v3
auth | noauth | priv
[access
< standard-acl-id>] [read < viewstring>] [write
< viewstring>]
“Displaying SNMP groups” on page 1101
snmp-server user < name> < groupname> v3
[[access < standard-acl-id>]
[[encrypted] auth md5 < md5-password> | sha
< sha-password> [priv [encrypted] des < des-password>]]]
“Defining an SNMP user account” on page 1100
snmp-server view < name> < mib_tree> included |
excluded
“Defining SNMP views” on page 1103
Commands See ...
clear public-key “Importing authorized public keys into the device” on
page 997
crypto key generate | zeroize “Generating a host key pair” on page 995
ip ssh authentication-retries < number> “Setting the number of SSH authentication retries”
on page 998
ip ssh idle-time < minutes> “Configuring maximum idle time for SSH sessions”
on page 1000
ip ssh key-authentication no | yes “Enabling DSA challenge-response authentication”
on page 998