Brocade BigIron RX Series Configuration Guide - Manual (Page 658)

580 BigIron RX Series Configuration Guide
53-1002484-04
Syslogs and debugging
20
Nov 23 08:40:29 CLUSTER FSM: CCRR message sent for client for multiple clients
Nov 23 08:40:29 CLUSTER FSM: new state: Loading
Nov 23 08:40:29 CLUSTER FSM: Received CCRR message from peer when CCP is up
Nov 23 08:40:29 CLUSTER FSM: cluster id 1, client id 101, old state: Init, event:
CCP Up
Nov 23 08:40:29 CLUSTER FSM: sending EVENT_ID_MCT_REMOTE_DEPLOY event
Nov 23 08:40:29 CLUSTER FSM: new state: Admin Up, master: TRUE
Nov 23 08:40:29 CLUSTER FSM: cluster id 1, client id 102, old state: Init, event:
CCP Up
Nov 23 08:40:29 CLUSTER FSM: sending EVENT_ID_MCT_REMOTE_DEPLOY event
Nov 23 08:40:29 CLUSTER FSM: new state: Admin Up, master: TRUE
Nov 23 08:40:29 CLUSTER FSM: cluster id 1, client id 102, old state: Admin Up,
event: Remote Up
Nov 23 08:40:29 CLUSTER FSM: sending EVENT_ID_MCT_REMOTE_CCEP_UP event
Nov 23 08:40:29 CLUSTER FSM: CCRR message sent for client 102 (return code : 0,
value = 00660018)
Nov 23 08:40:29 CLUSTER FSM: new state: Remote Up, master: FALSE
Nov 23 08:40:29 CLUSTER FSM: Received Loading-Done message from peer
Nov 23 08:40:29 CLUSTER FSM: cluster id 1, peer rbridge id 5, old state: Loading,
event: Loading Done
Nov 23 08:40:29 CLUSTER FSM: sending EVENT_ID_MCT_CCP_UP event
Nov 23 08:40:29 CLUSTER FSM: new state: CCP Up
Nov 23 08:40:29 CLUSTER FSM: cluster id 1, client id 102, old state: Remote Up,
event: Spoke Down
Nov 23 08:40:29 CLUSTER FSM: Sending client fsm state to LP, state 1
Nov 23 08:40:29 CLUSTER FSM: CCRR message sent for client 102 (return code : 0,
value = 00660018)
Nov 23 08:40:29 CLUSTER FSM: new state: Remote Up, master: FALSE
Nov 23 08:40:29 CLUSTER L2VPN:Spoke PW event - Master/Slave selection for client
rbridge 102 Successful (event = 2)
Nov 23 08:40:29 CLUSTER FSM: cluster id 1, client id 102, old state: Remote Up,
event: Spoke Up
Nov 23 08:40:29 CLUSTER FSM: new state: Remote Up, master: FALSE
Nov 23 08:40:29 CLUSTER L2VPN:Spoke PW event - Master/Slave selection for client
rbridge 102 Successful (event = 1)
Nov 23 08:40:29 CLUSTER FSM: Received CCRR message from peer when CCP is up
Nov 23 08:40:29 CLUSTER FSM: Received CCRR message from peer when CCP is up
Syntax: [no] debug cluster fsm
The debug cluster fsm client command displays cluster FSM information for the client.
Command output resembles the following example.
BigIron RX# debug cluster fsm client 400
CLUSTER fsm debugging is now ON for client rbridge 400
BigIron RX(config)#interface ethernet 3/13
BigIron RX(config-if-e1000-3/13)#disable
SYSLOG: <46>Dec 5 15:55:50 Brocade System: Interface ethernet 3/13, state down -
disabled
SYSLOG: <46>Dec 5 15:55:50 Brocade PORT: 3/13 disabled by operator from console
session.
BigIron RX(config-if-e1000-3/13)#
SYSLOG: <44>Dec 5 15:55:50 Brocade LACP: ethernet 3/13 state changes from FORWARD
to LACP_BLOCKED
SYSLOG: <46>Dec 5 15:55:50 Brocade LACP: Port 3/13 mux state transition:
aggregate -> not aggregate (reason: peer is out of sync)