Multi-chassis trunking – Brocade BigIron RX Series Configuration Guide User Manual
Page 1521

BigIron RX Series Configuration Guide
1443
53-1002484-04
Multi-Chassis Trunking
E
Multi-Chassis Trunking
Commands
See ...
lag <name> [static | dynamic] [id <number>]
“Creating and deploying the LAGs”
ports ethernet [slot/port] | to | [slot/port]
primary-port
<
slot/port>
deploy [forced | passive]
port-name
<
text> ethernet
<
slot/port> | pos
<
slot/port>
route-only
vlan
<
vlan-id>
“Creating VLANs for client traffic”
untagged ethernet [slot/port] | to | [slot/port]
tagged ethernet [slot/port] | to | [slot/port]
vlan
<
vlan-id>name
<
vlan-name>
hostname
<
string>
“Assigning the host name (optional)”
enable
port-name
<
text>
“Assigning a port name (optional)”
interface [ve
<
ve-id>]
ip address
<
ip-addr>
<
ip-mask>
cluster
<
cluster-name>
<
cluster-id>
“Configuring the cluster operation mode”
rbridge-id
<
id>
session-vlan
<
vlan-id>
member-vlan
<
x>to
<
y>
icl
<
icl-name> ethernet
<
x/y>
peer
<
peer-ip> rbridge-id
<
peer-rbridge> icl
<
map-icl>
deploy
client
<
client-name>
“Configuring the MCT cluster clients”
client-interface
<
interface> interface : ethernet
<
x/y>
peer
<
peer-ip> disable-fast-failover
“Creating and deploying the LAGs”
client-isolation loose
“Configuring client isolation mode”
client-isolation strict
client-interfaces shutdown
“Shutting down all the client interfaces”
keep-alive-vlan
<
vlan-id>
“Configuring a Keepalive VLAN”
peer
<
peer-ip> timers keep-alive
<
keep-alive time>
hold-time
<
hold-time>
“Setting the keepalive timers and hold time for the
peers”
show cluster [
<
name> |
<
client-id>]
“Displaying detailed cluster information”
show cluster
<
name> client
<
client-rbridge>