Brocade BigIron RX Series Configuration Guide - Manual (Page 1479)

BigIron RX Series Configuration Guide 1401
53-1002484-04
Syslog messages
A
Notification OSPF virtual intf retransmit, rid < router-id>,
intf addr < ip-addr>, nbr rid < nbr-router-id>,
pkt type is < pkt-type>, LSA type < lsa-type>,
LSA id < lsa-id>, LSA rid < lsa-router-id>
An OSPF interface on the device has
retransmitted a Link State Advertisement
(LSA).
The
< router-id> is the router ID of the device.
The < ip-addr> is the IP address of the
interface on the device.
The
< nbr-router-id> is the router ID of the
neighbor router.
The
< packet-type> can be one of the
following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
The < lsa-type> is the type of LSA.
The < lsa-id> is the LSA ID.
The < lsa-router-id> is the LSA router ID.
Notification OSPF originate LSA, rid < router-id>,
area < area-id>, LSA type < lsa-type>,
LSA id < lsa-id>,
LSA router id < lsa-router-id>
An OSPF interface has originated an LSA.
The
< router-id> is the router ID of the device.
The < area-id> is the OSPF area.
The < lsa-type> is the type of LSA.
The < lsa-id> is the LSA ID.
The < lsa-router-id> is the LSA router ID.
Notification OSPF max age LSA, rid < router-id>,
area < area-id>, LSA type < lsa-type>,
LSA id < lsa-id>, LSA rid < lsa-router-id>
An LSA has reached its maximum age.
The
< router-id> is the router ID of the device.
The < area-id> is the OSPF area.
The < lsa-type> is the type of LSA.
The < lsa-id> is the LSA ID.
The < lsa-router-id> is the LSA router ID.
Notification OSPF LSDB overflow, rid < router-id>,
limit < num>
A Link State Database Overflow (LSDB)
condition has occurred.
The
< router-id> is the router ID of the device.
The < num> is the number of LSAs.
Notification OSPF LSDB approaching overflow,
rid
< router-id>, limit < num>
The software is close to an LSDB condition.
The
< router-id> is the router ID of the device.
The < num> is the number of LSAs.
TABLE 242 Brocade Syslog messages (Continued)
Message level Message Explanation