Brocade BigIron RX Series Configuration Guide User Manual
Page 301
![background image](/manuals/361694/301/background.png)
BigIron RX Series Configuration Guide
223
53-1002484-04
Displaying IP information
7
Syntax: show ip
NOTE
This command has additional options, which are explained in other sections in this guide, including
the sections below this one.
This display shows the following information.
TABLE 54
CLI display of global IP configuration information
This field...
Displays...
Global settings
ttl
The Time-To-Live (TTL) for IP packets. The TTL specifies the maximum
number of router hops a packet can travel before reaching the device. If the
packet’s TTL value is higher than the value specified in this field, the
Brocade router drops the packet.
To change the maximum TTL, refer to
arp-age
The ARP aging period. This parameter specifies how many minutes an
inactive ARP entry remains in the ARP cache before the router ages out the
entry.
To change the ARP aging period, refer to
“Changing the ARP aging period”
bootp-relay-max-hops
The maximum number of hops away a BootP server can be located from the
Brocade router and still be used by the router’s clients for network booting.
To change this value, refer to
“Changing the maximum number of hops to a
router-id
The 32-bit number that uniquely identifies the Brocade router.
By default, the router ID is the numerically lowest IP interface configured on
the router. To change the router ID, refer to
enabled
The IP-related protocols that are enabled on the router.
disabled
The IP-related protocols that are disabled on the router.
Static routes
Index
The row number of this entry in the IP route table.
IP Address
The IP address of the route’s destination.
BigIron RX> show ip
Global Settings
ttl: 64, arp-age: 10, bootp-relay-max-hops: 4
router-id : 207.95.11.128
enabled : UDP-Broadcast-Forwarding IRDP Proxy-ARP OSPF
disabled: BGP4 Load-Sharing RIP DVMRP FSRP VRRP
Static Routes
Index IP Address Subnet Mask Next Hop Router Metric Distance
1 0.0.0.0 0.0.0.0 209.157.23.2 1 1
Policies
Index Action Source Destination Protocol Port Operator
1 deny 209.157.22.34 209.157.22.26 tcp http =
64 permit any any