Brocade BigIron RX Series Configuration Guide - Manual (Page 1505)

BigIron RX Series Configuration Guide 1427
53-1002484-04
FDP/CDP
E
FDP/CDP
IP
snmp-server enable traps bgp “Generating traps for BGP” on page 892
timers keep-alive < num> hold-time < num> “Changing the keep alive time and hold time” on
page 865
update-time < secs> “Changing the BGP4 next-hop update timer” on
page 865
Commands See ...
Commands See ...
cdp enable “Enabling interception of CDP packets on an
interface”
on page 1110
cdp run “Enabling interception of CDP packets globally” on
page 1110
clear fdp counters “Clearing FDP and CDP statistics” on page 1110
“Clearing CDP information” on page 1112
clear fdp table “Clearing FDP and CDP neighbor information” on
page 1109
fdp enable “Enabling FDP at the interface level” on page 1106
fdp holdtime < secs> “Changing the FDP hold time” on page 1106
fdp run “Enabling FDP globally” on page 1106
fdp timer < secs> “Changing the FDP update timer” on page 1106
show fdp entry * | < device-id> “Displaying FDP entries” on page 1108
“Displaying CDP entries” on page 1112
show fdp interface [ethernet < slot>/ < portnum>] “Displaying FDP information for an interface” on
page 1109
show fdp neighbor [ethernet < slot>/ < portnum>] [detail] “Displaying neighbor information” on page 1107
show fdp neighbors [detail | ethernet < portnum>] “Displaying neighbors” on page 1111
show fdp traffic “Displaying FDP and CDP statistics” on page 1109
“Displaying CDP statistics” on page 1112
Commands See ...
arp < ip-addr> < mac-addr> ethernet < slot/port> “Creating static ARP entries” on page 193
bootp-relay-max-hops < 1-15> “Changing the maximum number of hops to a BootP
relay server”
on page 221
clear ip route [ < ip-addr> < ip-mask> |
< ip-addr>/ < mask-bits>]
“Clearing IP routes” on page 232
default-mtu < num> “Globally changing the IP MTU” on page 184