Brocade BigIron RX Series Configuration Guide - Manual (Page 659)

BigIron RX Series Configuration Guide 581
53-1002484-04
Syslogs and debugging
20
SYSLOG: <44>Dec 5 15:55:50 Brocade LACP: ethernet 3/13 state changes from
LACP_BLOCKED to DOWN
Dec 5 15:55:50 CLUSTER FSM: sending EVENT_ID_MCT_LOCAL_CCEP_DOWN event
SYSLOG: <46>Dec 5 15:55:50 Brocade CLUSTER FSM: Cluster MCT-VPLS (Id: 1), client
R4 (RBridge Id: 400) - Local client CCEP down
Dec 5 15:55:50 CLUSTER FSM: cluster id 1, client id 400, old state: Up, event:
Local Down
Dec 5 15:55:50 CLUSTER FSM: Sending client fsm state to LP, state 1
Dec 5 15:55:50 CLUSTER FSM: new state: Remote Up, master: FALSE
Dec 5 15:55:51 CLUSTER FSM: Received CCRR message from peer when CCP is up (value
= 01900016)
SYSLOG: <46>Dec 5 15:55:53 Brocade LACP: Port 3/13 rx state transition: current
-> expired (reason: timeout)
BigIron RX(config-if-e1000-3/13)#enable
SYSLOG: <46>Dec 5 15:55:55 Brocade PORT: 3/13 enabled by operator from console
session.
Brocade(config-if-e1000-3/13)#
SYSLOG: <44>Dec 5 15:55:58 Brocade LACP: ethernet 3/13 state changes from DOWN to
LACP_BLOCKED
SYSLOG: <46>Dec 5 15:55:58 Brocade LACP: Port 3/13 rx state transition: defaulted
-> current
SYSLOG: <46>Dec 5 15:55:58 Brocade LACP: Port 3/13 partner port state transition:
not aggregate -> aggregate
SYSLOG: <46>Dec 5 15:56:00 Brocade LACP: Port 3/13 mux state transition: not
aggregate -> aggregate
SYSLOG: <44>Dec 5 15:56:00 Brocade LACP: ethernet 3/13 state changes from
LACP_BLOCKED to FORWARD
SYSLOG: <46>Dec 5 15:56:00 Brocade System: Interface ethernet 3/13, state up
Dec 5 15:56:00 CLUSTER FSM: sending EVENT_ID_MCT_LOCAL_CCEP_UP event
SYSLOG: <46>Dec 5 15:56:00 Brocade CLUSTER FSM: Cluster MCT-VPLS (Id: 1), client
R4 (RBridge Id: 400) - Local client CCEP up
Dec 5 15:56:00 CLUSTER FSM: cluster id 1, client id 400, old state: Remote Up,
event: Local Up
Dec 5 15:56:00 CLUSTER FSM: sending EVENT_ID_MCT_LOCAL_CCEP_UP event
Dec 5 15:56:00 CLUSTER FSM: new state: Preforwarding Remote Up, master: FALSE
Dec 5 15:56:00 CLUSTER FSM: Received CCRR message from peer when CCP is up (value
= 0190001e)
Dec 5 15:56:00 CLUSTER FSM: cluster id 1, client id 400, old state: Preforwarding
Remote Up, event: CCRR Ack Rcvd
Dec 5 15:56:00 CLUSTER FSM: Sending client fsm state to LP, state 2
Dec 5 15:56:00 CLUSTER FSM: new state: Up, master: FALSE
Syntax: [no] debug cluster fsm client <client-id>
The <client-id> variable specifies the client ID.
The debug cluster mdup command displays information related to MDUP operations.
Command output resembles the following example.
BigIron RX# debug cluster mdup
CLUSTER mdup debugging is now ON