Ipv6 acl – Brocade BigIron RX Series Configuration Guide User Manual
Page 1511
BigIron RX Series Configuration Guide
1433
53-1002484-04
IPv6 ACL
E
IPv6 ACL
Commands
See ...
ipv6 access-list
<
acl name>
“For IPv6 and supported protocols other than ICMP,
TCP, or UDP”
ipv6 access-list
<
name> deny | permit
<
ipv6-source-prefix>/
<
prefix-length> | any
<
ipv6-destination-prefix>/
<
prefix-length> | any
[sequence
<
number>]
“For IPv6 and supported protocols other than ICMP,
TCP, or UDP”
ipv6 access-list
<
name> deny | permit
<
ipv6-source-prefix>/
<
prefix-length> | any
<
ipv6-destination-prefix>/
<
prefix-length> | any
[sequence
<
number>] dscp
<
dscp-value>
permit | deny tcp
<
ipv6-source-prefix/prefix-length> | any | host
<
source-ipv6_address> [tcp-udp-operator
[source-port-number]]
<
ipv6-destination-prefix/prefix-length> | any | host
<
ipv6-destination-address> [tcp-udp-operator
[destination-port- number]] [ipv6-operator [
<
value>]]
[tcp-operator [
<
value>]]
permit | deny
<
protocol>
<
ipv6-source-prefix/prefix-length> | any | host
<
source-ipv6_address>
<
ipv6-destination-prefix/prefix-length> | any | host
<
ipv6-destination-address> [ipv6-operator [
<
value>]]
permit | deny icmp
<
ipv6-source-prefix/prefix-length> | any | host
<
source-ipv6_address>
<
ipv6-destination-prefix/prefix-length> | any | host
<
ipv6-destination-address> [ipv6-operator [
<
value>]]
[ [
<
icmp-type>][
<
icmp-code>] ] | [
<
icmp-messge>]
permit | deny udp
<
ipv6-source-prefix/prefix-length> |
any | host
<
source-ipv6_address> [tcp-udp-operator
[source port number]]
<
ipv6-destination-prefix/prefix-length> | any | host
<
ipv6-destination-address> [tcp-udp-operator [destination
port number]] [ipv6-operator [
<
value>]]
remark
<
comment-text>
“Adding a comment to an IPv6 ACL entry”
remark-entry sequence
<
sequence number>
<
comment-text>
“Adding a comment to an IPv6 ACL entry”
show ipv6 access-list [
<
access-list-name>]
“Adding a comment to an IPv6 ACL entry”
show running-config