Brocade BigIron RX Series Configuration Guide - Manual (Page 570)

492 BigIron RX Series Configuration Guide
53-1002484-04
Displaying queueing statistics
18
-----+----------------------------------------
0 | 0 0 0 0 0 0 0 0 1 1
1 | 1 1 1 1 1 1 2 2 2 2
2 | 2 2 2 2 3 3 3 3 3 3
3 | 3 3 4 4 4 4 4 4 4 4
4 | 5 5 5 5 5 5 5 5 6 6
5 | 6 6 6 6 6 6 7 7 7 7
6 | 7 7 7 7
COS-DSCP map:
COS: 0 1 2 3 4 5 6 7
--------------------------------------------------------
dscp: 0 8 16 24 32 40 48 56
IP Precedence-DSCP map:
ip-prec: 0 1 2 3 4 5 6 7
-------------------------------------------------------
dscp: 0 8 16 24 32 40 48 56
Syntax: show qos-maps
Table 101 describes the output parameters of the show qos-maps command.
Displaying queueing statistics
To display queueing statistics, enter the following command.
BigIron RX# show queueing
Current fair queue configuration:
Port | Scheduler Type Prio0 Prio1 Prio2 Prio3
| (Rates where specified are in Kbps)
-------+-------------------------------------+---------+---------+---------
1/1 | source-weighted Weight 5 10 20 30
1/2 | strict
TABLE 101 QoS mapping information
Field Description
Policed-dscp map:
d1 and d2 The policed DSCP mappings that are currently in effect.
Dscp-cos map:
d1 and d2 The DSCP to CoS mappings that are currently in effect.
COS-DSCP map:
COS The CoS (802.1p) values.
dscp The DSCP values to which the device maps the CoS values.
IP Precedence-DSCP map:
ip-prec The IP precedence values.
dscp The DSCP values to which the device maps the IP precedence values.