Brocade BigIron RX Series Configuration Guide User Manual
Page 1315
BigIron RX Series Configuration Guide
1237
53-1002484-04
Displaying BGP4+ information
46
This display shows the following information.
TABLE 202
Detailed BGP4+ route information
This field...
Displays...
Number of BGP4+ Routes advertised to
specified neighbor (appears only in
display for all routes)
For information about this field, refer to
Status codes
For information about this field, refer to
Prefix
For information about this field, refer to
Status
For information about this field, refer to
Age
The age of the advertised route, in seconds.
Next Hop
For information about this field, refer to
Learned from Peer
The IPv6 address of the neighbor from which this route is learned. “Local
router” indicates that the switch itself learned the route.
LOCAL_PREF
For information about this field, refer to
MED
The value of the advertised route’s MED attribute. If the route does not
have a metric, this field is blank.
BigIron RX# show ipv6 bgp routes detail
Total number of BGP Routes: 2
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED
1 Prefix: 2002::/16, Status: BL, Age: 2d17h10m42s
NEXT_HOP: ::, Learned from Peer: Local Router
LOCAL_PREF: 100, MED: 1, ORIGIN: incomplete, Weight: 32768
AS_PATH:
Adj_RIB_out count: 1, Admin distance 190
2 Prefix: 2002:1234::/32, Status: BL, Age: 2d17h10m42s
NEXT_HOP: ::, Learned from Peer: Local Router
LOCAL_PREF: 100, MED: 1, ORIGIN: incomplete, Weight: 32768
AS_PATH:
Adj_RIB_out count: 1, Admin distance 190