Brocade BigIron RX Series Configuration Guide - Manual (Page 1507)

BigIron RX Series Configuration Guide 1429
53-1002484-04
IP
E
ip mtu < num> “Changing the maximum transmission unit on an
individual interface”
on page 184
ip proxy-arp “Enabling proxy ARP” on page 193
ip redirect “Disabling ICMP redirect messages” on page 200
ip route < dest-ip-addr> < dest-mask> |
< dest-ip-addr>/ < mask-bits> < next-hop-ip-addr> |
ethernet < slot/port> | ve < num> [ < metric>] [tag < num>]
[distance < num>]
“Configuring a static IP route” on page 203
ip route < ip-addr> < ip-mask> |
< dest-ip-addr>/ < mask-bits> null0 [ < metric>] [tag
< num>] [distance < num>]
“Configuring a “null” route” on page 204
ip router-id < ip-addr> “Changing the router ID” on page 185
Ip show-portname “Displaying interface name in Syslog” on page 225
ip show-subnet-length “Changing the network mask display to prefix format”
on page 166
ip source-route “Disabling forwarding of IP source-routed packets” on
page 197
ip radius source-interface
ethernet
< slot/port> |
loopback < num> |
ve < num>
“Specifying a single source interface for Telnet,
TACACS, TACACS+, or RADIUS packets”
on page 186
ip tacacs source-interface
ethernet
< slot/port> |
loopback < num> |
ve < num>
“Specifying a single source interface for Telnet,
TACACS, TACACS+, or RADIUS packets”
on page 186
ip telnet source-interface ethernet < slot/port> |
loopback < num> |
ve < num>
“Specifying a single source interface for Telnet,
TACACS, TACACS+, or RADIUS packets”
on page 186
ip ttl < 1-255> “Changing the TTL threshold” on page 197
rate-limit-arp < num> “Rate limiting ARP packets” on page 190
router-interface ve < num> “Assigning an IP address to a virtual interface” on
page 165
show arp [ethernet < slot/port> | mac-address
< xxxx.xxxx.xxxx> [ < mask>] | < ip-addr> [ < ip-mask>]]
[ < num>] [| begin < expression> | exclude < expression> |
include < expression>]
“Displaying the ARP cache” on page 226
show ip “Displaying global IP configuration information” on
page 222
show ip cache [ < ip-addr>] [| begin < expression> |
exclude < expression> | include < expression> ]
“Displaying the forwarding cache” on page 228
show ip interface [ethernet < slot/port>] | [loopback
< num>] | [ve < num>]
“Displaying IP interface information” on page 224
show ip route < num> | [ < ip-addr> [ < ip-mask>] [debug |
detail | longer] ] | connected | bgp | isis | ospf | rip |
static | summary ] [| begin
< expression> |
exclude < expression> | include < expression>]
“Displaying the IP route table” on page 229
Commands See ...