Brocade BigIron RX Series Configuration Guide - Manual (Page 649)

BigIron RX Series Configuration Guide 571
53-1002484-04
MAC Database Update over cluster control protocol
20
0000.0000.0002 4/6 0 400 CL
Syntax: show mac cluster <cluster-id> | <cluster-name> vlan <vlan-id> [local | remote]
The <cluster-id> variable specifies the cluster ID.
The <cluster-name> variable specifies the cluster name.
The <vlan-id> variable specifies the VLAN ID.
The local option displays the MAC entries that are learned locally.
The remote option displays the MAC entries that are learned through the MDUP message from the
peer.
For more information about the output parameters of the show mac cluster vlan command, refer to
Table 111 .
Displaying cluster client VLAN-specific MAC entries
To display cluster client VLAN-specific MAC entries, enter a command such as the following.
BigIron RX# show mac cluster 4000 vlan 400 client devclient local
Total Cluster Client Local(CCL) MAC for this client in vlan 400: 1
Type Code-CCL:Cluster Client Local CCR:Cluster Client Remote CL:Local CR:Remote
MAC Address Port Age VLAN Type
0000.0000.0001 4/3 0 400 CCL
Syntax: show mac cluster <cluster-id> |<cluster-name> vlan <vlan-id> client <client-name> [local
| remote]
The <cluster-id> variable specifies the cluster ID.
The <cluster-name> variable specifies the cluster name.
The <vlan-id> variable specifies the VLAN ID.
The <client-name> variable specifies the client name.
The local option displays the MAC entries that are learned locally.
The remote option displays the MAC entries that are learned through the MDUP message from the
peer.
For more information about the output parameters of the show mac cluster vlan client command,
refer to
Table 111 .
Displaying MDUP packet information
To display the statistics of the MDUP packets, enter the following command.
BigIron RX# show mac mdup-stats
MDUP Information
================
MDUP Data buffers in queue : 0
MDUP Statistics
===============
MDUP Update Messages sent: 12
Add Mac sent: 2