Brocade BigIron RX Series Configuration Guide - Manual (Page 1119)

BigIron RX Series Configuration Guide 1041
53-1002484-04
Displaying MAC Port Security information
33
BigIron RX# show port security statistics 7
Module 7:
Total ports: 0
Total MAC address(es): 0
Total violations: 0
Total shutdown ports 0
Syntax: show port security statistics <module>
Displaying a list of MAC addresses
To display the list of all MAC addresses in the MAC table, enter the following commands.
Syntax: show mac [all]
Entering show mac displays MAC addresses, excluding those denied when violation restrict is
enabled. The show mac all command displays all MAC address entries, including those denied
when violation restrict is enabled.
Displaying a list of secure and denied MAC addresses
To display all MAC addresses on an interface, both secure or denied, enter the following command.
TABLE 167 Output from the show port security statistics < module > command
This field... Displays...
Total ports The number of interfaces on the module.
Total MAC address(es) The total number of secure MAC addresses on the module.
Total violations The number of security violations encountered on the module.
Total shutdown ports The number of interfaces on the module shut down as a result of security
violations.
BigIron RX#show mac
Total active entries from all ports = 8
MAC Address Port Age VLAN Type
0003.0000.0001 3/2 Secure 1 secure(Allow)
0003.0000.0003 3/2 Secure 1 secure(Allow)
0004.0000.0002 5/1 0 1
0004.0000.0004 5/1 0 1
0004.0000.0001 5/1 0 1
BigIron RX#show mac all
Total active entries from all ports = 10
MAC Address Port Age VLAN Type
0003.0000.0001 3/2 Secure 1 secure(Allow)
0003.0000.0003 3/2 Secure 1 secure(Allow)
0003.0000.000a 3/2 Secure 1 secure(Deny)
0003.0000.000b 3/2 Secure 1 secure(Deny)
0004.0000.0002 5/1 0 1
0004.0000.0004 5/1 0 1
0004.0000.0001 5/1 0 1