Brocade BigIron RX Series Configuration Guide - Manual (Page 1099)

BigIron RX Series Configuration Guide 1021
53-1002484-04
Example configurations
32
Displaying the authenticated MAC addresses
To display the MAC addresses that have been successfully authenticated, enter the following
command.
Syntax: show auth-mac-addresses authorized-mac
Displaying the non-authenticated MAC addresses
To display the MAC addresses for which authentication was not successful, enter the following
command.
Syntax: show auth-mac-addresses unauthorized-mac
Example configurations
This section includes configuration examples of multi-device port authentication with dynamic
VLAN assignment, and multi-device port authentication and 802.1X authentication.
Access Whether or not the MAC address was allowed or denied access into the
network.
Age The age of the MAC address entry in the authenticated MAC address list.
TABLE 163 Output from the show auth-mac-address < address > command (Continued)
This field... Displays...
BigIron RX# show auth-mac-addresses authorized-mac
MAC TABLE
---------------------------------------------
MAC Address Port VLAN Access Age
---------------------------------------------
00A1.0010.2000 1/18 1 Allowed 0
00A1.0010.2001 1/18 1 Allowed 120
00A1.0010.2002 1/18 1 Allowed 0
BigIron RX# show auth-mac-addresses unauthorized-mac
MAC TABLE
---------------------------------------------
MAC Address Port VLAN Access Age
---------------------------------------------
00A1.0010.2000 1/18 1 Blocked 0
00A1.0010.2001 1/18 1 Blocked 120
00A1.0010.2002 1/18 1 Blocked 0