Brocade BigIron RX Series Configuration Guide - Manual (Page 54)

liv BigIron RX Series Configuration Guide
53-1002484-04
Enhancements in release 02.6.00
SNMP MIBs for Layer 2 ACLs
and Filters The following MIB tables have been added to this
release:
•
Textual Conventions
•
Layer 2 ACL Next Clause Table
•
Layer 2 ACL Configuration Table
•
Layer 2 ACL Binding Configuration Table
Book: MIB Reference
Chapter: Filtering Traffic
Section: Layer 2 ACLs
TABLE 9 Summary of enhancements in release 02.6.00
Enhancement Description See page
True Remote Console The new rconsole feature provides a true
connection to the MP/LP console port. While the
old session-based rconsole is a remote X-Window
which is connected to one of the windows on the
target system, the new rconsole is a remote
desktop. N/A
Limited/Fixed Boot Code Book: Foundry BigIron RX
Configuration Guide
True Remote Console The new rconsole feature provides a true
connection to the MP/LP console port. While the
old session-based rconsole is a remote X-Window
which is connected to one of the windows on the
target system, the new rconsole is a remote
desktop. N/A
Limited/Fixed Boot Code Book: Foundry BigIron RX
Configuration Guide
Layer 1 features
Digital Optical Monitoring Beginning with release 0 2.6.00, Digital Optical
Monitoring will only support newly qualified
1Gigabit optics. Digital Optical Monitoring for
previous 1Gigabit optics that do not include "OM"
after the model numbers will not be able to use this
feature. Book: Brocade BigIron RX
Series Hardware
Installation Guide
Chapter: Connecting a
BigIron RX Series Switch
to a Network Device
Section:Digital Optical
Monitoring
BFD for IS-IS, OSPFv2 and
OSPF v3 BigIron RX provides support for Bidirectional
Forwarding Detection (BFD) in Version 02.6.00 of
the Multi-Service IronWare software. Book: BigIron RX Series
Configuration Guide
Chapter:
“BiDirectional
Forwarding Detection
(BFD)”
LACP Continous Fast Timer In a dynamic or keep-alive LAG, a port's timeout can
be configured as short or long Book: BigIron RX Series
Configuration Guide
Chapter:
“Link
Aggregation”
Section: “Configuring an
LACP timeout”
TABLE 8 Summary of enhancements in release 02.7.00 (Continued)
Enhancement Description See page