Brocade BigIron RX Series Configuration Guide - Manual (Page 571)

BigIron RX Series Configuration Guide 493
53-1002484-04
Displaying queueing statistics
18
1/3 | destination-weighted Weight 10 20 30 40
1/4 | strict
1/5 | strict
1/6 | strict
1/7 | strict
1/8 | strict
1/9 | strict
1/10 | strict
1/11 | strict
1/12 | strict
1/13 | enhanced-strict Rate 50 10 40 Remaining
1/14 | strict
1/15 | strict
1/16 | strict
1/17 | strict
1/18 | strict
1/19 | strict
1/20 | strict
1/21 | strict
1/22 | strict
1/23 | strict
1/24 | strict
2/1 | destination-weighted Weight 10 30 20 50
2/2 | destination-weighted Weight 10 30 20 50
(output truncated for brevity)...
Packet drop strategy: Weighted Random Early Detection (WRED):
QType Enable AverWt MaxQSz DropPrec MinAvgQSz MaxAvgQSz MaxDropProb MaxPktSz
0 No
1 No
2 Yes 100% 32768 0 32768 32768 0% 512
1 32768 32768 0% 512
2 32768 32768 0% 512
3 32768 32768 0% 512
3 No
Syntax: show queueing
Table 102 describes the output parameters of the show queueing command.
TABLE 102 Queueing configuration information
Field Description
Current fair queue configuration:
Port Specifies the port number.
Scheduler Specifies the scheduling scheme enabled on the port.
Type Specifies the type of scheduler. The type can be any one of the following:
•
Weight-based scheduler.
•
Rate-based scheduler.
Prio<num> Specifies the bandwidth allocated to the forwarding queues.
Packet drop strategy: Weighted Random Early Detection (WRED):
QType Specifies the queue type.
Enable Specifies if the WRED configuration is enabled or not.
AverWt Specifies the average weight in percentage.