Reliant Octel 200 and Octel 300 Message Servers PB6001401 User Manual
Page 89

Hardware 2-17
Octel Overture 200/300 Serenade 3.0
PB60014–01
Table 2-1 Octel Overture 200/300 Subsystems
Subsystem Configurations
Description
Part Number
Works for Serenade Hard Disk
Drive
740-6248-001
SCSI hard disk drive for storage of Works for
Serenade programs and databases.
Works for Serenade Serial I/O
Cable
520-6007-001
Cable connecting the EntryWorks ACP board to
the Works for Serenade serial I/O panel.
Works for Serenade External
Modem
SA10194-03
Dedicated external modem for remote access to
the Works for Serenade subsystem.
Works for Serenade Modem
Cable
SA10187-01
Cable between the Works for Serenade modem
and the serial I/O panel.
Option Control Chip (OCC)
FK90087
Contains information about the software options
the Octel Overture 200/300 is equipped with.
Table 2-2 Octel Overture 200 Subsystems
Subsystem Configurations
Part Number
Description
Motherboard (MB)
740-6503-001
Backplane board for interconnecting system
modules and system power distribution.
Power Supply Units (PSU)
90-132 VAC
180-260 VAC
42-60 VDC
740-6504-001
740-6505-001
740-6506-001
Power conversion from system input power to
four regulated, d.c. voltages. The load/backup
device is part of the PSU.
Works for Serenade Serial I/O
Panel
740-6037-002
Rear-mount RS-232C connector panel.
DC Inlet Box
740-6537-002
Inlet box for d.c. powered systems.
Fan Panel Assembly
740-6502-002
System cooling fans.
Air Filter
840-6507-001
Washable air filter.