Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 185)

Reports 5-3
Octel Overture 200/300 Serenade 3.0 PB60014–01
Select the number of the report you wish to list.
.
Enter L R # (report number), to designate a specific report before the menu is displayed.
The prompts displayed after selecting a specific report (i.e., 1–0) vary slightly as shown in the following
sections. These reports can be printed. Before each reported is displayed, the message server prompts
“READY PRINTER, THEN PRESS RETURN . ”
Digital Network Reports
The System Performance report, 1, and the Network Traffic report, 2, also print information about digital
networking. To print digital information for either report, after entering the report number, enter
D . For
example, to list digital network information for the System Performance report, at the : prompt, enter
:1 D
If only 1 is entered for the System Performance report, the report does not include any digital networking
information. The digital networking System Performance report is printed only when
1 D is entered. If
only 2 is entered for the Network Traffic report, the report includes all networking information. Enter 2
D to get information only about digital networking.
Listing User Statistics (Selections 3 or 4)
Once a User Statistics, Mailbox Usage, or User Status Detail report has been selected, the following
prompt displays:
ENTER DIGIT PATTERN (”?” FOR HELP):
CHECKING USER MAILBOXES...DONE.
READY PRINTER, THEN PRESS RETURN...
If ? is entered for help, the following prompt displays:
Enter one of the following to select one or more mailboxes:
”ALL” – ALL MAILBOXES.
1–8 DIGITS – ONLY MAILBOXES BEGINNING WITH THIS DIGIT PATTERN.
EMPTY LINE – ABORT WITHOUT ACTION.
If 1–8 digits are entered, the list displays the mailboxes beginning with the digit(s) entered. In this
example the first digit is 5 and mailboxes are three digits long:
Entered Digits Mailboxes Displayed
5 All mailboxes beginning with 5
56 All mailboxes beginning with 56
567 Only mailbox 567