Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 284)

6-54 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
FAST BUSY MINIMUM TONE OFF PERIOD
This delay is the shortest delay that a TONE OFF can be to qualify as a fast-busy tone.
Use — The message server uses this delay to determine whether the tone cadences that it is
monitoring is a fast-busy tone. If the TONE OFF is shorter than this delay, the message server
assumes that it is not a fast-busy tone.
Coordinate the following application-delay indexes for cadence recognition. Refer to Table 6-3.
- Set index 49 to a value equal to the largest value for any of the following delay indexes: 53, 61, 63,
69, or 71.
- Set index 50 to a value less than the value for any of the following delay indexes: 54, 62, 64, 70, or 74.
- Set index 51 to a value equal to the largest value for any of the following delay indexes: 55, 65, 67,
71, or 75.
- Set index 52 to a value less than the value for any of the following delay indexes: 56, 66, 68, 72, or 76.
Table 6-3 Application Delays for Cadence Recognition, for Determining Tone On/Tone Off
TONE EVENT Maximum
Tone On
Minimum
Tone On
Maximum
Tone Off
Minimum
Tone Off
Single Interrupt Ringback Index 53 Index 54 Index 55 Index 56
Max/Min Acceptable Tone Ranges Index 49 Index 50 Index 51 Index 52
Double Interrupt Ringback, long periods Index 61 Index 62 Index 65 Index 66
Double Interrupt Ringback, short periods Index 63 Index 64 Index 67 Index 68
Slow Busy Index 69 Index 70 Index 71 Index 72
Fast Busy Index 73 Index 74 Index 75 Index 76
Using UPDATE to Modify Application Delays
You can use UPDATE to modify specific application delays. When you modify an application-delay
index, enter the new value in milliseconds, rounded to the nearest 20 ms.
Use the UPDATE program as follows:
- List the current values in the Application Delay Table
- Modify the values
List Command
Use the LIST command to list the current values in the Application Delay Table. The message server
prompts for an individual delay. Enter the application-delay index to be listed.
To list all application delay indexes, press Enter . The following is an example of the Application Delay
Table.
76
.L APP