Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 272)

6-42 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
This rows lists the types of ports installed.
- The Analog row refers to the 4- and 8-port LIC. If the 4- and 8-port line cards
are not controlled by Capacity on Demand (COD), the Authorized column is
empty.
- The Fax row is the number of fax-application-processor channels installed. If
the fax card is not controlled by COD, the Authorized column is empty.
.
The fax capability for a mailbox is controlled by COD.
- The DSP row shows the number of DLC16 and ILC12 ports authorized, used,
and installed.
- The PIC row shows the number of PBX integration card ports authorized, used,
and installed.
This row lists the types of mailboxes installed.
- The Voice row is the number of authorized, used, and installed mailboxes
used for messaging.
- The Non-Voice row shows the number of mailboxes designated for
applications use. These are mailboxes assigned Attribute 26 — MAY NOT
USE INTERNAL MESSAGING FEATURES. For non-voice mailboxes, the
value in the Authorized field is the installed number of mailboxes less the
number of used voice mailboxes.
- The VMB row is the number of authorized, used, and installed Visual Mailbox
licenses. The value in the Installed field is equal to the value for authorized
voice mailboxes.
- The Fax row is the number of authorized, used, and installed fax mailbox
licenses. The value in the Installed field is equal to the value for installed voice
mailboxes.
This row lists the number of message storage hours authorized, used and installed.
The value in the Authorized field is the number of hours purchased for COD drives
added to the total hours on non-COD drives, not including the message server
overhead. The Used field indicates the total number of hours actually used to store
messages, names, greetings, redundant copies and network names. The Installed
field is the actual physical capacity of all drives in the message server.
.
The hours used for message server overhead are not included in either the
Used or Installed values. If all drives were either non-COD drives or fully
authorized COD drives, Installed and Authorized would be the same.
Shows the maximum number of disk-drive slots possible for the message server.
Shows the maximum number of ports possible for the message server, including
analog, DSP, PIC, and fax.
Shows the maximum number of entries allowed in SCHEDULE Table entries. The
maximum number is 8.
Lists the number of languages installed.
Ports
Mailboxes
Storage
Maximum
Number of
Drives
Maximum
Number of Ports
Maximum
Number of
Schedule Table
Entries
Number of
Languages