Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 363)

Call Processing Trace Activities 7A-11
Octel Overture 200/300 Serenade 3.0 PB60014–01
Table 7A-2 EVENT and AUX Activities in Call Process Trace Log (continued)
TYPE
Column
Entry
DESCRIPTION
AUX
Column
Entry
DESCRIPTION
EVENT
Column
Entry
ONT_IN,
ONT_OUT SER_NUM Serial number packet sent by the node to
the base server. The serial number (in hex)
is traced in the SOURCE column.
ONT_IN,
ONT_OUT SHDR_REQ Session header request packet sent by the
base server to the node. The serial number
of the base is in the SOURCE column.
ONT_IN,
ONT_OUT SHDR_RSP Session header response packet sent by the
node to the base server. The serial number
of the node is in the SOURCE column. ACCEPT
REJECT
The node is accepting the proposed
connection.
The node is rejecting the proposed
connection.
ONT_ERR SND_FAIL OctelNet packet send failure. An attempt to
prepare or send an OctelNet packet failed.
The reason for the failure is indicated in
the AUX column for encryption failure,
scrambling failure, checksum failure, or
the remote side hanging up. For other
errors, the AUX column is blank. ENCRPT
SCRMBL
CHKSUM
HANGUP Encryption failure
Scrambling failure
Checksum failure
Remote side hanging up
LAN SNMP_QRY SNMP information has been requested. 001
002 Digital performance report
Network traffic report
SNMP_SND SNMP information has been sent.
STATUS NO_ANSWR
FAST_BSY
BUSY
EVENT
RINGING
UNAVAIL
TALKOFF
CAMPON
FAILED
CXPORT
STATUS SUCCESS
COMPLETE
VCUREADY
VCUCONN
Completed function
VCU ready to connect
VCU connected
LAN STATUS
(continued)
FAIL
DISKFULL
NOTFND
NONETNAM
UNEXPREQ Generic failure
Mailbox not found
Network name cannot be updated
Unexpected request
MBXFULL
NORECORD
NTNAMFUL
FWDDEPTH Mailbox full
Mailbox set to no record COS
NetNam Table full
Max message forwarding depth exceeded
ALL_BSY
OEM_FAIL
REV_FAIL
COURUPDN All LCH are busy
Failed because of OEM mismatch
Protocol level not supported
Courtesy up/down in progress