Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 553)

Octel Private MIB 11C-7
Octel Overture 200/300 Serenade 3.0 PB60014–01
::= { locEntry 1 }
locName OBJECT–TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read–only
STATUS mandatory
DESCRIPTION
”System Name of This Location Entry, SELF means this system”
::= { locEntry 2 }
locIpAddr OBJECT–TYPE
SYNTAX IpAddress
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Internet Address of this Location”
::= { locEntry 3 }
locLinkType OBJECT–TYPE
SYNTAX INTEGER {
lowspeed(1),
highspeed(2)
}
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Type of the network interface”
::= { locEntry 4 }
locInDomain OBJECT–TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Whether this location is in the same Uniform Numbering Plan
domain. ”
::= { locEntry 5 }
locColocated OBJECT–TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Whether this location is in the same location.”
::= { locEntry 6 }
locroute OBJECT IDENTIFIER ::= { locEntry 7 }
route1 OBJECT–TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read–only
STATUS mandatory
DESCRIPTION
”First Entry in the Route Table for this location.”
::= { locroute 1 }
route2 OBJECT–TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Second Entry in the Route Table for this location.”