Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 362)

7A-10 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
Table 7A-2 EVENT and AUX Activities in Call Process Trace Log (continued)
TYPE
Column
Entry
DESCRIPTION
AUX
Column
Entry
DESCRIPTION
EVENT
Column
Entry
PUT_IN Message was put in mailbox or location. Type of message entered in AUX
RBLD_END Event logged at the end of the rebuild
process for the Names Directory.
RBLD_STRT Event logged at the beginning of the
rebuild process for the Names Directory.
RBLD_P1 Logged an inconsistency during pass 1 of
the rebuild for the Names Directory.
.
The first 8 digits of the mailbox
number are printed in the
MBX/EXTN column.
BADUSRNM
BADNETNM
USRINCON
NETINCON
RBLD_P2 Logged an inconsistency during pass 2 of
the rebuild for the Names Directory.
.
The first 8 digits of the mailbox
number are printed in the
MBX/EXTN column.
BADNAMNM
USRINCON
RBLD_P Logged an inconsistency during pass 3 of
the rebuild for the Names Directory.
.
The first 8 digits of the mailbox
number are printed in the
MBX/EXTN column.
BADNAMNM
USRINCON
ONT_ERR RCV_FAIL Logged an OctelNet packet receive failure.
An attempt to receive/decode an OctelNet
packet failed. The reason for the failure is
indicated in the AUX column for
decryption failure, unscrambling failure,
checksum failure, timeout, or the remote
side hanging up. For other errors, the AUX
column is blank. DECRPT
UNSCRM
CHKSUM
TIMOUT
HANGUP Decryption failure
Unscrambling failure
Checksum failure
Timeout
Remote side hanging up
RECORD Start record message. Type of message is entered in AUX
column
REMOVED Message removed from mailbox or
location.
LAN RCV Received message. SUCCESS
RECEIVED Network message received.
RECRD_CALL Record call in progress.
ONT_IN,
ONT_OUT SAVE_GO Save go (DTMF digit 9). Sent by the base
server to the node after receiving the save
request from the node.
ONT_IN,
ONT_OUT SAVE_RQ Save request (DTMF digit 8). Request by
the node to the base server after receiving
an end of message from the base.
LAN SEND Final message status result of STRTSND. SUCCESS
CALLFAIL
Network connection was not successful or
was closed. Will retry to make connection.
SENT Message sent.