Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 621)

Procedures 12-57
Octel Overture 200/300 Serenade 3.0 PB60014–01
Action Octel Overture 200/300 Description and Response
The Octel Overture 200/300 displays the following screen. (There may be
a delay before the screen appears.)
:B4
Selected drive has been replaced.
To reload the system.
To display the boot process.
Refer to Installation, Octel Overture 200/300 Testing section, in this
volume.
To list the Hardware Error Table.
If errors appear, refer to the System Errors And Traffic Peg chapter.
14. Enter the number of the drive
slot to be replaced.
Reload the System
15. Make sure the configuration
backup diskette is
write-enabled.
16. Insert the configuration backup
diskette into the floppy drive.
17. Press the lower button
on the CPU.
18. Press Enter
19. Log on to the system using the
maintenance password.
20. Verify correct system operation.
21. @L H