Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 304)

7-10 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
- Call-forwarding mailbox assigned
@L T 2
Enter mailbox (Empty line = ALL)
:4720
Enter start time : Year Month Day Hour Minute or C (continuous)
:
MM/DD/YY
HH:MM:SS PRT TYPE EVENT AUX MBX/EXTN MSG# SL U L SOURCE
04/05/97 10:05:19 MSG PUT_IN FWD_RNA 4720 0359
04/05/97 10:05:19 009 MBX MSGWAIT SET 4720
04/05/97 10:34:50 029 MBX LOGON 4720
04/05/97 10:34:50 029 MBX HAS_MSGS 016 4720
04/05/97 10:34:50 029 MBX NEW_MSGS 001 4720
Option 3, Port Activity
Select 3 to display port activity. To display activity for all ports, leave the Enter Port: field blank.
To display activity for a specific port, enter the port number. The following port activities are displayed:
- Caller action
- Line drops
- DTMF digits in and out
- Call status (busy/RNA)
- Call transfers made
- Invalid security code entered
- Number of messages sent on port
@L T 3
Enter port (Empty line = ALL)
:15
Enter start time : Year Month Day Hour Minute or C (continuous)
:
MM/DD/YY
HH:MM:SS PRT TYPE EVENT AUX MBX/EXTN MSG# SL U L SOURCE
04/05/97 09:47:30 015 PORT DIGIT_OUT B
04/05/97 09:47:30 015 PORT DIGIT_OUT 1
04/05/97 09:47:30 015 PORT DIGIT_OUT 2
04/05/97 09:47:31 015 PORT DIGIT_OUT 0
04/05/97 09:47:31 015 PORT DIGIT_OUT 8
04/05/97 09:47:31 015 PORT DIGIT_IN B
04/05/97 09:47:32 015 PORT DIGIT_IN 9
Option 4, Location Activity
Select 4 to display network location activity. To display activity for all network locations, leave the
Enter Location: field blank. To list the activity for a specific network location, enter the location
code or only partial-location-code digits. The location entered is displayed in the MBX/EXTN column.
The location activities displayed are as follows:
- Network messages added or removed from a network location