Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 520)

11-4 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
System
Parameter
Description and Use
235 LAN: SNMP MANAGER IP ADDRESS
The IP address of the SNMP manager’s PC/workstation, which must be of the form
M.N.O.P, where M = 1–223; N and O = 0–255, and P = 1–254.
236 LAN: SNMP MANAGER HOST aSCII NAME
The host name of the SNMP manager’s PC/workstation, which can be up to 31
alphanumeric characters long.
237 LAN: SNMP LOCATION OF VOICE MAIL CABINET
The location is a descriptive field that specifies the location of the Octel Overture
200/300, which can be up to 31 characters.
238 LAN: SNMP NAME OF SYSTEM CONTACT
The name of the person who needs to be contacted in case of network trouble with
the Octel Overture 200/300 (that is, the Octel Overture 200/300 system
administrator). Also, include the person’s phone number, if known. The name can
be up to 31 characters long.
239 LAN: SNMP READ COMMUNITY
The read community that can only access SNMP data. This is a password that
provides read-only access to the SNMP manager, which can be up to 19 characters
long.
240 LAN: SNMP READ WRITE COMMUNITY
The read-write community that can access and modify SNMP data. This is a
password that provides read/write access to the SNMP manager, which can be up
to 19 characters long.
242 LAN: SEND TRAP TO THE SNMP MANAGER ON ALARM
If this parameter is set to Yes and if the SNMP manager IP address (or manager
name if a name server is configured) is configured, the CPU will generate an
SNMP trap request to the LAN card, whenever a hardware error is logged a
sufficient number of times for its priority to cause an alarm call. The default is No.