Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 610)

12-46 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
Action Octel Overture 200/300 Description and Response
To log on to system.
Refer to the Hardware Replacement chapter,Hard Disk Drive (HD)
Replacement section, for procedures to follow for physical installation of a
drive. Hard disks may be hot plugged.
At the @ prompt enter the slot number for the added drive. The VCU
tests the slot and updates its status record.
Repeat DSKTST for each drive to be added.
Reviews the status of all drive slots.
@ DSKMAP
SLOT: 1 2 3 4 5
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
SHELF B| | | System 1 | System 2 | |
| | | ID:S1 ACTIVE | ID:S2 ACTIVE | |
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
SLOT: 1 2 3 4
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
SHELF C| Voice 1 | Voice 2 | Voice 3 | Voice 4 |
| ID: V1 ACTIVE | ID: EMPTY | ID: EMPTY | ID: EMPTY|
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
The following menu is presented:
@DISKO
CURRENT STATUS
Slot Type ID Status Configured
––––––––––––––––––––––––––––
B3 System1 S1 ACTIVE Configured
B4 System2 S2 ACTIVE Configured
C1 Voice1 V1 ACTIVE Configured
DISK OPTIONS
1. ADD DISK
2. REMOVE DISK
3. REPLACE A DISK
4. RESTORE SYSTEM
5. UPGRADE LANGUAGES
6. UPGRADE SYSTEM
Select option to be performed
(1–5 – Empty line = EXIT)
:1
Drive in slot C1 has been removed.
7. Enter the password. Press
.
Enter
8. Install the disk.
9. @DSKTST Enter
10. @DSKMAP Enter
Choose the Correct Disk Option
11. @DISKO Enter