Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 616)

12-52 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
Action Octel Overture 200/300 Description and Response
To log on to the Octel Overture 200/300.
At the @ prompt enter the slot number for the removed drive. The VCU
tests the slot and updates its status record.
Repeat
DSKTST for each drive removed.
Views the status of all drive slots.
@
DSKMAP
SLOT: 1 2 3 4 5
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
SHELF B| | | System 1 | System 2 | |
| | | ID:S1 ACTIVE | ID: S2 ACTIVE | |
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
SLOT: 1 2 3 4
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
SHELF C| Voice 1 | Voice 2 | Voice 3 | Voice 4 |
| ID: UNKNOWN | ID: EMPTY | ID: EMPTY | ID: EMPTY|
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
The following menu is presented:
CURRENT STATUS
Slot Type ID Status Configured
––––––––––––––––––––––––––––
B3 System1 S1 ACTIVE Configured
B4 System2 S2 ACTIVE Configured
C1 Voice 1 –– ACTIVE Configured
DISK OPTIONS
1. ADD DISK
2. REMOVE DISK
3. REPLACE A DISK
4. RESTORE SYSTEM
5. UPGRADE LANGUAGES
Select option to be performed
(1–5 – Empty line = EXIT)
:
After several seconds, the Octel Overture 200/300 displays
Remove drive in slot C1 and repeat DISKO REMOVE command.
8. Press Enter
9. @DSKTST Enter
10. @DSKMAP Enter
Choose the Correct Disk Option
11. @DISKO Enter
12. Choose option 2 —
REMOVE DISK .