Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 372)

8-2 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
The boot ROM diagnostic errors and their most likely causes are listed on the following pages. The CPU
error number is displayed in hexdecimal form. A fatal error means that the message server does not come
up.
Table 8-1 Boot ROM Diagnostic Errors
CPU Error
No.
Description
Most Likely
Cause
001 Fatal Microprocessor instruction set error CPU
002 Fatal EPROM checksum error CPU
003 Fatal Memory context register error CPU
004 Fatal Map RAM pattern test error CPU
005 Fatal Map RAM addressing test error CPU
006 Fatal DRAM pattern test error CPU
00A Fatal DRAM addressing test error CPU
00E Erroneous parity error during DRAM tests CPU
00F Erroneous write protect error during DRAM tests CPU
010 Parity error not detected CPU
011 Write protect not detected CPU
012 Data corrupted during write protect test CPU
013 Z180 CSIO test error CPU
015 Analog to digital converter test error CPU
016 +5V VCC out of range (+4.75 to +5.25V) PSU
017 +5V clear out of range (+4.50V to +5.50V) PSU
018 +12V clear out of range (+10.8V to +13.2V) PSU
019 +12V motor out of range (+11.4V to +12.6V) PSU
01A Battery out of range (+3.57V to +5.25V) CPU
01B Temp out of range (<10 C or >50 C / <50F or >122F) SYSTEM
01C Z180 PRT test error CPU
01D Fatal Unexpected NMI error CPU
01E Fatal Unexpected interrupt error CPU
01F Z180 DMAC test error CPU
022 Z180 ASCI test error CPU
023 Modem loopback test error CPU
024 TOD RAM pattern or addressing test error CPU
025 TOD alarm interrupt error CPU
026 TOD not counting CPU
027 Floppy disk controller test error CPU
02B OCC write error OCC