Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 228)

R
Quick Reference Guide
Octel Overture 200/300
Maintenance Commands
Octel Overture 200/300 Serenade 3.0 PB60014–01
Section
Information
Command Subject
Integration Cards UPINTG Restarts the integration cards and therefore disrupts
call processing for approximately one to two
minutes.
Integration Board C I x y Clears the integration board pegs.
x = slot number
y = unit number
Traffic Pegs Traffic Peg Count
Table L P Lists the pegs.
C P Clears the pegs.
Miscellaneous Baud Rate BAUD Displays the current baud rate setting. The
available baud rates are 300, 600, 1200, 2400,
4800, 9600, and 19200.
LAN Card CD x For Digital Networking, removes the LAN card
from service.
CU x For Digital Networking, returns the LAN card to
service.
x = slot number
Automatic Message
Purge APURGE x y z Starts the message purge function if Automatic
Message Purge is not already in progress. Displays
the thresholds specified and asks for confirmation
before initiating the message purge function.
x = save threshold
y = new threshold
z = Net Name
Automatic Message
Purge CPURGE Cancels message purge if it is in progress,
regardless of whether it was initiated automatically
or by the
APURGE command. Asks for
confirmation before cancelling message purge.
Message Purge MBLOCK x y Blocks a message from being played. It prevents a
mailbox holder from starting to play, or replay, the
message after it is blocked.
x = message header number
y = indicates that the message is to be blocked.