Reliant Octel 200 and Octel 300 Message Servers PB6001401 User Manual

Page 281

Maintenance

Commands 6-51

Octel Overture 200/300 Serenade 3.0

PB60014–01

RINGBACK MINIMUM TONE ON PERIOD

This delay is the shortest delay that a TONE ON can be to qualify as a ringback.

Use — The message server uses this delay to determine whether the tone cadences that it is
monitoring is a ringback. If the TONE ON is shorter than this delay, the message server
assumes that it is not a ringback.

RINGBACK MAXIMUM TONE OFF PERIOD

This delay is the longest delay that a TONE OFF can be to qualify as a ringback.

Use — The message server uses this delay to determine whether the tone cadences that it is
monitoring is a ringback. If the TONE OFF is longer than this delay, the message server
assumes that it is not a ringback.

RINGBACK MINIMUM TONE OFF PERIOD

This delay is the shortest delay that a TONE OFF can be to qualify as a ringback.

Use — The message server uses this delay to determine whether the tone cadences that it is
monitoring is a ringback. If the TONE OFF is shorter than this delay, the message server
assumes that it is not a ringback.

TIME TO WAIT FOR FIRST TONE

This delay should only be modified when using CPT-DTMF integration and must be set to 0
or a value greater than application delay 51.

Use — If application delay 123 is 0, the server waits for the amount of time specified by
application delay 51 for the first TONE ON. If application delay 123 is non-zero, after dialing
out digits for an outcall, the server waits this amount of time for the FIRST TONE ON
condition. If no TONE ON occurs in this specified time, the server assumes the call was
answered.

Application Delay indexes 61 through 68 are used only if System Parameter 26 is set to YES.

DOUBLE INTERRUPTED RINGBACK MAXIMUM TONE ON LONG PERIOD

This delay is the longest delay that a TONE ON, of the long TONE ON period, can be to
qualify as a double interrupted ringback.

Use — The message server uses this delay to determine whether the tone cadences that it is
monitoring is a double interrupted ringback. If the TONE ON is longer than this delay, the
message server assumes that it is not a double interrupted ringback.

DOUBLE INTERRUPTED RINGBACK MINIMUM TONE ON LONG PERIOD

This delay is the shortest delay that a TONE ON, of the long TONE ON period, can be to
qualify as a double interrupted ringback.

Use — The message server uses this delay to determine whether the tone cadences that is
monitoring is a double interrupted ringback. If the TONE ON is shorter than this delay, the
message server assumes that it is not a double interrupted ringback.

123