Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 636)

12-72 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
Upgrade Languages
This section provides the procedures to follow to prepare the system disk(s) for more than one language. Up to a
maximum of four languages can be installed.
.
Disk space for the additional prompts can be allocated and languages added before they have been purchased.
Order Administration can increase the number of languages installed on the message server to a maximum of
four.
When the DISKO option, Upgrade Language is entered, the message server prompts to enter the quantity of
languages desired. The amount of reallocated disk space is determined by the number of languages entered.
The upgrade can take several hours.
Caution!
When Upgrade Language is performed, the voice
storage capacity on each system drive is decreased by
approximately one hour per language installed. Each
system drive must have at least one hour of voice
storage for each language installed, as prompts are
stored redundantly.
Action Octel Overture 200/300 Description and Response
Prepare the System
1. Forward ports.
Boot the System
2. Make sure software diskette #1
(for the correct release level) is
write-protected.
3. Insert software diskette #1 (for
the correct release level) into
the FD.
4. Adjust the baud rate of the
terminal/teleprinter to 300, 1200
or 9600 baud.