Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 41)

INSTALL 1-11
Octel Overture 200/300 Serenade 3.0 PB60014–01
After each mailbox is entered, a colon (:) is displayed, indicating that the next mailbox can be
entered.
Press Enter at the colon when you are finished entering mailboxes. The message server prompts
Do you wish to add more users? Enter N. The INSTALL program goes to the next
question.
If you press Enter before finishing, the Octel Overture 200/300 asks whether you want to exit the
USER Table. Simply respond NO to return to the USER Table. Mailboxes may also be added later
using UPDATE.
3. SLOTS
The SLOTS Table contains information about each line card slot, integration card slot, and
applications card slot. The SLOTS Table allows each line card and integration card to be configured
individually. Enter the slot number and the type of card to be installed.
.3. SLOTS
Enter SLOT NUMBER to INSTALL
INS:1
6 –LIC4 2 –SLIC 8 –ACP
7 –DAC4 3 –RIC 17–FAX4
10–LIC8 4 –ATTIC 16–FAX8
11–TLC8 13–SIC8 22–LAN
18–LIC4I
5 –MITEL
23–DTC17–E1
26–DLC16
50–PICROLM
51–PICATT
52–PICNT
33–ILIC12FR
34–ILIC12UK
35–ILIC12JP
37–ILIC12GR
Enter Card Type.
SLOT 1 : 6
.
When the configuration information for a port is the same information entered for the previous
port, only the extension number of the port need be entered, followed by
Enter . The
information for the remainder of the line is automatically entered.
Different cards can be configured within a single Octel Overture 200/300. The EntryWorks ACP card
can only be configured in slot 7 for the Octel Overture 200 and in slot 12 for the Octel Overture 300.
.
The dialog for configuring a telemarketing line card (TLC) is similar to the dialog for
configuring a line interface card (LIC).
After you enter the card type for DLC16, ILC12, and PIC, enter the LSTTAB Table to be referenced.