Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 524)

11-8 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
The LAN status is always UP, INITIALIZING, or DOWN, as follow:
The LAN card is running, with CPU communication to the card. The LAN is
running normally. If a Courtesy Down is in progress, the message
COURTESY
DOWN IN PROGRESS is shown.
When the LAN status is UP , the high-speed link status is given for each high-speed
digital location, as follows:
- LOCATION The entry in this column is the location name.
- STATUS The entry in this column is the status of the link to this
location, which is either
UP or DOWN.
- LAN-PRTCL The entry in this column is the Digital Networking Protocol
level of the other system. This entry allows compatibility
with future releases. It does not relate to analog protocol
numbering.
- OTHER The entry in this column can be one of the following:
HNDSHAKE , waiting for start-up handshake reply;
OEM-FAIL , cannot establish connection, OEM mismatch.
The LAN is in the initialization process. The current status of the initialization
process is given, from among the following:
- WAITING FOR LAN-REBUILD TO COMPLETE
- WAITING FOR LAN-BOARD TO START
- WAITING FOR LAN INFO FROM VCU
- STARTING HIGH-SPEED CONNECTIONS
CPU communication to the LAN card is not UP, and no LAN activity is possible.
The reason, if known, is given. The following are possible reasons:
- System does not have the Digital Networking feature.
- A COURTESY-DOWN is in process.
- LAN SYSTEM PARAMETER NOT ENABLED.
- LAN BOARD NOT CONFIGURED IN SLOTS TABLE.
At any time during the listing of the LAN status, you can press Escape to terminate the listing within a
line or two.
LAN Status
INITIALIZING
Entry
DOWN Entry