Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 515)

R
Quick Reference Guide
Octel Overture 200/300
LAN Card
Octel Overture 200/300 Serenade 3.0 PB60014–01
Command Description
Taking LAN card out service of and returning it to service
Courtesy Down CD x Takes the LAN card out of service without interrupting
activities in progress.
x = slot number of LAN card.
Courtesy Up CU x Brings the LAN card back into service.
x = slot number of LAN card.
Network Test
TEST LAN TEST LAN Tests all locations in the network.
TEST LAN x Tests a single location in the network;
x = the specific location name to be tested.
SNMP Test
TEST SNMP TEST SNMP Tests the mechanism of communication between the Octel
Overture 200/300 message servers and the SNMP manager
system.
Maintenance and Troubleshooting
Diagnostic Tools
LAN CARD PING Echo
Test CMD x PING y Lowest level “echo” test from the local LAN to the
destination message server to verify that both LAN cards
are UP, data transfer is possible, and IP addresses are
correct.
x = slot number of LAN card
y = IP address of the device to which the Ethernet
packet is sent.
LAN STATUS LANSTAT Lists basic information about the current status of the LAN
— UP DOWN, INITIALIZING.