beautypg.com

Reliant Octel 200 and Octel 300 Message Servers PB6001401 User Manual

Page 412

background image

8-42

Installation and Maintenance Volume

Octel Overture 200/300 Serenade 3.0

PB60014–01

#

Description

75

SEND FAILED TO EXTENDED MAILBOX Ċ MAILBOX FULL/SET TO NOT

ACCEPT MESSAGE

Number of times a message was not sent to an Extended mailbox because the

mailbox was full or set not to accept messages.

76

SET UP OFFSITE MESSAGE WAITING

Number of times offsite outcalling digit string was set up.

77

MESSAGE WAITING CALLED CX/MX PORT

Number of times an extension was called and answered by an Octel Overture

200/300 CX/MX port.

78

NETWORK MESSAGE SEND ATTEMPT

The number of Protocol 1 or 3 network message send attempts. This peg is

incremented each time the local system attempts to transmit a voice message.

79

NETWORK MESSAGE SEND SUCCESS

The number of Protocol 1 or 3 network messages sent successfully. This peg is

incremented each time the local system successfully transmits a voice message.

Protocols 1 and 3 send all pending messages for a location (except night

messages) when that location is called.

Night messages are included in the pending messages for a location during the

hours defined in System Parameter 62 Ċ NET: NIGHT DELIVERYSTART

TIME, and System Parameter 63 Ċ NET: NIGHT DELIVERYEND TIME.

80

NETWORK SEND COLLISION

Number of network message send attempts that collided with an incoming

call. This peg is incremented during Protocol 5 operation.

81-

88

CODE DOWNLOADED SUCCESSFULLY TO INTEGRATION CARD

Applies only to integration units of integration cards. Number of times

operating code was successfully downloaded to the integration card after

reset.

97

DIGIT LOST DURING NETWORK COMMUNICATION

The number of times a digit was lost or garbled during network

communications.
(Protocols 1, 3, or 5 only) This peg is incremented if the destination system

responds during network communications that the digits received have failed

a data integrity check. Digits can be corrupted by noise or poor transmission

quality on the network connection.

98

AIC CALLED CX/MX PORT

(AIC = Assisted Inward Calling) Number of times a CX/MX port answered

when the Octel Overture 200/300 was extending a call.

99

POWER FAILED

Number of times the Octel Overture 200/300 detected a power failure.