Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 550)

11C-4 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
”Total number of seconds of message sent to the networks”
::= { message 7 }
secRecv OBJECT–TYPE
SYNTAX INTEGER
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Total number of seconds of message received from the networks”
::= { message 8 }
lchNumber OBJECT–TYPE
SYNTAX INTEGER
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Maximum number of LAN channel available in the system.”
::= { lanCh 1 }
sec50pct OBJECT–TYPE
SYNTAX INTEGER
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Total number of second that 50 percent of lan channel is busy”
::= { lanCh 2 }
sec75pct OBJECT–TYPE
SYNTAX INTEGER
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Total number of second that 75 percent of lan channel is busy”
::= { lanCh 3 }
sec100pct OBJECT–TYPE
SYNTAX INTEGER
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Total number of second that all of lan channel is busy”
::= { lanCh 4 }
lchInSendSec OBJECT–TYPE
SYNTAX INTEGER
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Number of second LCH is in used for sending message”
::= { lanCh 5 }
lchInRecvSec OBJECT–TYPE
SYNTAX INTEGER
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Number of second LCH is in used for receiving message”
::= { lanCh 6 }
outAttempts OBJECT–TYPE
SYNTAX Counter
ACCESS read–only
STATUS mandatory
DESCRIPTION
”Number of time an outgoing lan connection is attempted”
::= { lanConn 1 }
outRejects OBJECT–TYPE
SYNTAX Counter