Reliant Octel 200 and Octel 300 Message Servers PB6001401 User Manual
Page 617
Procedures 12-53
Octel Overture 200/300 Serenade 3.0
PB60014–01
Action
Octel Overture 200/300 Description and Response
@DISKO
CURRENT STATUS
Slot
Type ID
Status
Configured
––––––––––––––––––––––––––––
B3
System1
S1
ACTIVE
Configured
B4
System2
S2
ACTIVE
Configured
C1
Voice 1
––
ACTIVE
Not Configured
DISK OPTIONS
1. ADD DISK
2. REMOVE DISK
3. REPLACE A DISK
4. RESTORE SYSTEM
5. UPGRADE LANGUAGES
6. UPGRADE SYSTEM
Select option to be performed
(1–5 – Empty line = EXIT)
:2
Drive in slot C1 has been removed.
To reload the system.
Refer to the Installation chapter, Octel Overture 200/300 Testing section,
in this volume.
13. Repeat the
DISKO
command
and again choose option 2 –
REMOVE DISK.
Reload the System
14. Make sure the configuration
backup diskette is
write-enabled.
15. Insert the configuration backup
diskette into the FD.
16. Press the lower button on the
CPU.
17. Log on to the system using the
maintenance password.
18. Verify correct system operation.