Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 611)

Procedures 12-47
Octel Overture 200/300 Serenade 3.0 PB60014–01
Action Octel Overture 200/300 Description and Response
The Octel Overture 200/300 displays the following screen. (There may be
a delay before the screen appears.)
Selected drive in slot C1 has been added
To reload the system.
Refer to the Installation chapter, Octel Overture 200/300 Testing section,
in this volume.
.
If adding Redundancy, refer to the Electronic Feature Delivery
section of this chapter for procedures about how to add system
features. Refer to the Feature Description volume, Hard Disk
Redundancy chapter, for details about the feature.
12. Choose option 1 —
ADD DISK.
Reload the System
13. Make sure the configuration
backup diskette is
write-enabled.
14. Insert the configuration backup
diskette into the FD.
15. Press the lower button on the
CPU.
16. Log on to the system using the
maintenance password.
17. Verify correct system operation.