Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 499)

DTIC 10-7
Octel Overture 200/300 Serenade 3.0 PB60014–01
Enter the number to specify the LSP Table to be referenced for this slot.
.
The LSP Table for this DPNSS integration first must be added and
configured at a password level higher than Maintenance level. If the
ACULAB LSP Table does not appear in the list of LSP Tables,
contact Technical Support to add the table and configure it
correctly.
Adding or Modifying a DTIC Card
When adding DTIC cards, ports can be added if the number of used ports is less than the number of
authorized ports. The message server checks to see that the number of ports configured does not exceed
the maximum number of DSP ports purchased.
After the card type is entered, the LSP Table must be entered. The name of the LSP Table to choose is
ACULAB. After the LSPTAB table is chosen, enter information about each port, including extension
number, COS, answer mode (AX, CX, MX), if the port is used for message waiting and network
outcalling (Y/N), and test channel (Y/N).
.
The LSP Table for this DPNSS integration first must be added and configured at a password level
higher than Maintenance level. If the ACULAB LSP Table does not appear in the list of LSP
Tables, contact Technical Support to add the table and configure it correctly.
LSPTAB