Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 25)

Octel Overture 200/300 Serenade 3.0 PB60014–01
Chapter Description
The Octel Overture
t200/300 Installation and Maintenance Manual, Installation and Maintenance
volume, contains information about preparing for an Octel Overture 200/300 installation, and monitoring
and maintaining the Octel Overture 200/300 after installation. The following is a brief summary of each
chapter within the Installation and Maintenance volume.Voice 200, Voice 300, and Voice 250-i
The Install chapter provides instructions about using the INSTALL program
to install a new Octel Overture 200/300 message server and reinstall an
existing system.Voice 200, Voice 300, and Voice 250-i
This chapter discusses the Octel Overture 200/300 architecture. Included
are an overview of the hardware, description of Octel Overture 200 and
Octel Overture 300Voice 200, Voice 300, and Voice 250-i subsystems, and
diagrams of the systems.
Octel Overture 200/300 installation requires special attention to the
telephone system. This chapter includes topics such as how to identify
changes to the Central OfficePublic Exchange trunking, and how to make
the required changes to the phone system. Sample letters to the Central
OfficePublic Exchange and PBX service provider are included to ensure
smooth changes and transition to a new system.
This chapter provides detailed instructions and procedures for installing an
Octel Overture 200/300. The entire process is presented, from receiving
and inspecting to the step-by-step testing of an installed system.
This chapter describes the Octel Overture 200/300 reports. The reports are
valuable tools that allow service personnel to monitor Octel Overture
200/300 performance in both stand-alone and networked environments.
Each report is discussed in detail. This section also discusses how to
generate the reports and clear the data.
This chapter describes the maintenance commands and diagnostics tests.
This chapter describes the LOG commands including LOG, Call
Processing Trace and Call Detail Record.
This chapter describes boot ROM, hardware errors and traffic pegs.
This chapter describes the preventive maintenance requirements for Octel
Overture 200/300 message servers and the hardware replacement
procedures and lists the system components and part numbers.
This chapter describes the Digital Trunk Interface Card (DTIC) used for
the DPNSS–ACULAB integration. The DTIC is a 30-port line card
Chapter 1
INSTALL
Chapter 2
HARDWARE
Chapter 3
PREPARING THE
PHONE SYSTEM
Chapter 4
INSTALLATION
Chapter 5
REPORTS
Chapter 6
MAINTENANCE
COMMANDS
Chapter 7
LOG COMMANDS
Chapter 8
SYSTEM ERRORS AND
TRAFFIC PEGS
Chapter 9
HARDWARE
REPLACEMENT
Chapter 10
DTIC CARD