Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 256)

6-26 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
- To use the command to print the status for only the digital network channel specified, at the @
prompt, type
DCSTAT x Enter
For this command,
x is the channel number.
- To use the command to print the status for a range of digital network channels, at the @ prompt, type
DCSTAT x y Enter
For this command,
x is the first digital network channel number in a range, and y is the last digital
network channel number in the range.
- The Continuous option repeats the command until you press Escape . To use the command to print
the status continuously for the digital network channel specified, at the @ prompt, type
DCSTAT x C Enter
For this command,
x is the digital network channel number and C specifies continuous print.
.
Press Escape to interrupt this command.