Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 297)

Log Commands — Log, List Trace, Call Detail Record 7-3
Octel Overture 200/300 Serenade 3.0 PB60014–01
- Page [length] . Enter the number of lines that should be displayed between headers. The default
displays the header only once.
- \ (backslash). Before pressing Enter , you can enter a backslash (\) to designate that additional print
options or filters follow on another line. If the print options and filters designated are longer than one
line, the backslash connects the additional line to the command string. The backslash can also be
used at any time in the line to segment criteria to identify print options or filters requested easily.
- Mask . Not used at Maintenance level.
- C . Press the letter C to designate that the records should print continuously from the time the log
command is initiated.
To terminate printing and return to the @ prompt, press Escape .
BE Option Set Begin Time of Log Files
Use the BE option to set the beginning time for the CDR or MAC log. Once the begin time is set, records
collected before this date are no longer accessible.
Setting the begin time for a log facilitates the interface to an external data collection package that periodically
collects the current data in the log. You must specify the year, month, and day; the hour and minute are
optional.
To set the begin time, at the @ prompt, type
LOG BE X Enter
In this command, X is CDR or MAC.
Enter the year, month, day, hour, and minute of the begin time. Separate the information by a space.
@LOG BE CDR
Specify Beginning Time
>97 1 6
BEGIN TIME SET FOR LOG
MF Option, Modify Filters
Use the MF option with the CDR log to enable or disable the filters for logging combinations of
transaction and status types. Refer to the Call Detail Record Log section for information about MF for
this log.
PF Option, Display Filters
Use the PF option with the CDR log. Enabled or disabled filters that are modified by the LOG MF command
can also be displayed with the LOG PF command. Refer to the Call Detail Record Log section for
information about PF for this log.